Products
-
-
Raw billets, beam billets, and plate billets are lifted using electric lifting magnets.
-
Specialized Lifting Electromagnet for High-Speed Wire (Coil)
-
Pipe blanks, steel pipes, large round blanks for lifting with electric lifting magnets
-
Heavy rail, steel pipe lifting with electric lifting magnets
-
Medium-thick steel plate lifting with electric lifting magnet
-
Medium-thick steel plate multi-sheet lifting special lifting electromagnet
RELATED INFORMATION
Hysteresis-type power cable reel
The hysteresis-type power cable reel consists of a three-phase asynchronous motor, a single-phase bearing, a hysteresis coupler, a reduction device, and a winding drum. When the electrical equipment moves away from the power source, the cable is dragged by external force, overcoming the hysteresis torque of the hysteresis coupler. At this time, the hysteresis coupler generates slip (the unidirectional bearing acts as a brake), thereby releasing the cable on the winding drum. When the electrical equipment returns to the power source, the asynchronous motor drives the unidirectional bearing and the hysteresis coupler, amplifying the power through the reducer to drive the winding drum to retract the cable.
Classification:
E-mail：hnyysg0730@163.com
Case Details
Selection Instructions
The selection of the hysteresis power cable reel is related to many factors. To make the selection quick, reasonable, and economical, please provide the following parameters when ordering:
● Operating speed of the electrical equipment
● Installation height of the reel (distance from the installation platform to the ground)
● Length of the cable to be wound (operating distance of the electrical equipment) and the rotation direction during unwinding (left or right) and whether a limit switch is needed
Size Diagram
Reel size and cable capacity
Appearance and installation dimensions
Main technical parameters: for reference only
a. Rated working voltage: 380V, 6KV, 10KV.
b. Rated current: below 30A, 30~150A, 150~500A
c. Output torque adjustment range of a single drive head: 130Nm~300Nm
d. Weight: weight of a single driver 71kg, weight of gearbox 400kg
Selection of the number of reel drivers
Note:
1. D - outer diameter of the reel, h - installation height of the reel.
2. The values in the table are for user reference; orders exceeding the above range can be negotiated.
3. When the cable is a flat cable, the size of the winding reel needs to change.
Key words:
Electromagnetic equipment manufacturing, multi-function lifting electromagnet, special lifting electromagnet, multi-purpose lifting electromagnet, permanent magnet coupling hysteresis head
Previous Page
Next Page
RELATED PRODUCTS
This series is used for absorbing and lifting cast iron ingots, steel balls, pig iron blocks, machined chips; return materials, iron concentrate powder, cutting heads; packaged scrap steel, etc. The excitation method can be: rated voltage DC220V method; strong excitation method: over-excitation method.
This series consists of oval-shaped lifting electromagnets, mainly used for efficiently loading and unloading scrap steel in narrow carriages. It can be customized according to the Size of the carriage.
This series is the most widely used rectangular electromagnet, mainly suitable for lifting square billets, steel ingots, and large initial rolled billets, and can also be used for lifting round billets, section steel, etc. Different magnetic circuit designs are adopted for different types of steel.
Online consultation
The company will continue to develop and innovate with the enterprise spirit of worrying about customers first and enjoying the happiness of customers later, and strive to become a giant of modern enterprises. Welcome all friends to visit and guide our company!
Address: Liji Avenue, Junshan Industrial Park, Yueyang City, Hunan Province
Fax: 0730-8647119